Use Case: Concrete Foundations

Permanent Concrete Waterproofing That Stops Water at the Matrix Level

Vetrofluid penetrates 1.5 to 3 inches into concrete and reacts with the free lime to form additional C-S-H -- permanently densifying and waterproofing from within. No surface film. No reapplication cycles. No comparison to Sikalastic polyurethane membranes.

Get a Quote Download the Technical Data Sheet

Review the specs before you decide

Download the VetroFluid Technical Sheet for full test data

Technical Documents

VetroFluid Technical SheetTDS

Head-to-Head Comparison

Vetrofluid vs. Sikalastic (Polyurethane Membrane)

Property	Vetrofluid	Sikalastic
Mechanism	Pozzolanic C-S-H reaction densifies concrete from within	Surface film barrier coats the exterior only
Penetration Depth	1.5 to 3 inches into the concrete matrix	Surface-only coating, zero penetration
Permanence	Permanent -- cannot delaminate, peel, or wear away	Requires reapplication cycles as film degrades
Appearance	Transparent and odorless, zero color change	Potential visible film, gloss effect, or VOC odor
Infrastructure Suitability	Approved for drinking water tanks, dams, and tunnels	Limited potable water contact approval
Application	One coat, low-pressure pump sprayer -- done	Multi-layer system: primer + multiple coats
Ecological Profile	Non-toxic, ecological, safe around people and animals	Often solvent-based with VOC concerns

Mechanism

Vetrofluid

Pozzolanic C-S-H reaction densifies concrete from within

Sikalastic

Surface film barrier coats the exterior only

Penetration Depth

Vetrofluid

1.5 to 3 inches into the concrete matrix

Sikalastic

Surface-only coating, zero penetration

Permanence

Vetrofluid

Permanent -- cannot delaminate, peel, or wear away

Sikalastic

Requires reapplication cycles as film degrades

Appearance

Vetrofluid

Transparent and odorless, zero color change

Sikalastic

Potential visible film, gloss effect, or VOC odor

Infrastructure Suitability

Vetrofluid

Approved for drinking water tanks, dams, and tunnels

Sikalastic

Limited potable water contact approval

Application

Vetrofluid

One coat, low-pressure pump sprayer -- done

Sikalastic

Multi-layer system: primer + multiple coats

Ecological Profile

Vetrofluid

Non-toxic, ecological, safe around people and animals

Sikalastic

Often solvent-based with VOC concerns

Proven Technology, Not Marketing Claims

Penetration Depth

1.5 to 3 inches

Reacts with free lime and unhydrated cement deep within the slab

C-S-H Formation

Permanent densification

Forms additional calcium-silicate-hydrate, the same compound that gives concrete its strength

Appearance

Transparent & odorless

Zero gloss, zero color change -- truly invisible treatment

Ecological

Non-toxic formula

Safe for use around people, animals, and the environment

Built for Critical Infrastructure

Retaining walls

Dams

Drinking water tanks

Foundations

Tunnels

Vetrofluid applied to a bridge structure for permanent waterproofing

Get a Quote for Vetrofluid

Tell us about your waterproofing project. Chuck will get back to you with pricing and lead times.

Prefer to talk it through?

Chuck is available for spec support and volume pricing.

406-598-4684